搜索历史清除全部记录

最多显示8条历史搜索记录噢~

All

All
Product Management
News and Information
Introduction Content

Product Center

Specializing in the production of electrical metering and protection equipment.

Home

LVQB-110

Category:

35–500 kV SF6 Gas-Insulated Current Transformer

Inquiry for a quote

Keywords:

35–500 kV SF6 Gas-Insulated Current Transformer

Detailed Introduction

Science Fiction ₆ Current transformer environmental parameters (customizable for extreme and high-altitude conditions):

Ambient temperature: maximum +40°C, minimum -30°C
Altitude: ≤2000m
Contamination Level: Class D/Class E Contamination
Ice thickness: not exceeding 20 mm
Maximum wind speed: not exceeding 35 m/s
Intended use: Indoor or outdoor

Science Fiction ₆ Current Transformer Product Structure

Science Fiction ₆ Current Transformer (CT) Structure (from top to bottom)

1. Top: Housing + Primary Winding + Secondary Winding
Enclosure: The enclosure completely isolates the internal secondary windings, bushing-type insulators, and other components from the external environment (including wind, rain, contamination, condensation, and small animals).
Primary winding: The primary winding is typically a conductive rod that passes through the center of the secondary winding.
Secondary winding: Used for metering, measurement, and protection purposes, it converts the primary high current into a secondary low current.

2. Middle section: Casing (external insulation)
Casing: made of high-strength electrical porcelain or silicone rubber, serving as the primary external insulation, supporting the upper section, and sealing the internal cavity.

3. Bottom: Base + Secondary Junction Box
Base: Supports the entire weight of the product and is equipped with mounting holes for connecting the product to the steel bracket.

4. SF ₆ Gas (filling)
Function: SF ₆ As the primary insulating medium, gas offers an insulation strength far exceeding that of air and possesses self‑healing capabilities. It also enables oil‑free operation, thereby eliminating fire and explosion hazards, while simultaneously facilitating heat dissipation and protecting internal components from oxidation and moisture ingress.
Requirement: SF ₆ The gas shall have a high purity (≥99.9%), low water content (≤15 μL/L), and reliable sealing under rated pressure (annual leakage rate ≤0.5%). During operation, emissions are strictly prohibited to mitigate the greenhouse effect, and any decomposition products resulting from faults must remain within specified limits.

Science Fiction ₆ Current transformer parameters (special parameters can be customized)

Project	LVQB-35	LVQB-110	LVQB-220	LVQB-330	LVQB-500
Product Type	Outdoor, single-phase, SF ₆ Inverted position
Rated Voltage (kV)	35	110	220	330	500
Maximum Voltage (kV)	40.5	126	252	363	550
Rated frequency (Hz)	50
Rated primary current (A)	100-5000	100-5000	100-5000	0.5-5000	100-5000
Rated secondary current (A)	1/5
Instrument safety factor	5/10
Accuracy level	5P, 10P, 0.5, 0.5S, 0.2, 0.2S, TPY
Operating pressure (MPa)	0.4				0.45
Alarm pressure (MPa)	0.35	0.35	0.35	0.35	0.4
Short-term thermal current / Duration	40kA/3s	40kA/3s	50kA/3s	63kA/3s	63kA/3s
Rated dynamic stability current	100kA	100kA	125kA	160kA	160kA
Rated primary current amplification value	120%
Polarity	Negative polarity
Creepage distance (mm)	1256	3906	8593	11253	17050
Arc Flash Distance (mm)	500	1180	2200	3200	4200
1.2 µV/√3 partial discharge quantity (pC)	5
A partial discharge quantity (pc)	10
Insulating material	Porcelain	Porcelain / Silicone Rubber